Worm travel gearbox with motor
worm motor
A robust worm-drive gearbox powered by an MM28 engine. Ideal applications where a simple to fit, high torque output is required. Great for student based jobs which includes robots and buggies.
The unit has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. E.g. reducing to size. The electric motor is snap fitted into its cradle to activate the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine is not turning. The high gear ratios of 216:1 or 336:1 get this to gearbox appropriate for small walking robots, lifting mechanisms, and additional applications where large torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draw up to a few amps, making them ideal applicants for the DRV8833 motor driver carrier. Engine overheating can be caused by excessive stalling, also at suprisingly low voltages. We recommend that you utilize stall-detection sensors, or just view your robot, to make sure that it doesn’t stall for more than a few seconds at a time.
This gearbox includes a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also suits on the smaller threaded end of the shaft, although it is not specifically designed to work with this type of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct position worm geared motors established new criteria for reliability, performance and economic climate with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design offers easy integration today and a really future proof alternative. The Ever-Power gear electric motor offers total versatility in mounting options includes shaft, base, encounter, and flange solutions. The motor terminal box could be mounted in substitute positions rotated in 90º steps around the motor frame offering for unparalleled integration opportunities.
Ever-Power gear motors comply with North American and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total remedy for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be utilized outside or in wet and dusty conditions without the use of additional enclosures. Full rated output is offered by the result shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With integrated inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the remedy for applications requiring a corner turn, optional dual result, or perhaps an inability for the motor to be back driven. The DC correct angle gear motors are created for constant and intermittent duty operation. Our right angle gear reducers are designed with several mounting plate options, making them ideal for a number of DC electric motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are designed to generate high torque in a small package size. Worm Gear Motors are excellent for applications that want a personal- locking or breaking feature since the output shaft can’t rotate when there’s no power applied. Also, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision minimize gears, voltages and sizes, EP Products has a DC Worm Gear Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Oral Chairs / Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with among our Worm Gearheads. EP Products will work with you to design and manufacture a Worm Gear Motor that may optimize the overall performance of your specific application.
Built to your unique requirements
Engine Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Slash / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine runs on the metal gear box for toughness and a high torque output. Due to the special mechanical framework of the worm get the motor output shaft is definitely self locking and will not be rotated.
This part runs on the two wire connection and supports direction control along with PWM speed control. Rated voltage is 12v and will accomplish 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear models from EP DRIVESYSTEMS especially show their strength in applications where large gear ratios are essential. Our worm geared motors are therefore optimally suited for use in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions allow simple and efficient cleaning of the get system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular design give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each one of these has its own unique requirements. The EP series worm gear motors can be quickly and efficiently adapted to fulfill your needs.
Worm gear products impress with their high power density and small style. If required, we are able to also source them with the highly effective nsd tupH surface area treatment.
In addition to the basic EP housing, we offer an extensive type of bolt-on parts to customize the merchandise including torque arms, shaft addresses and output flanges. These could be easily field set up, but we may also be glad to assemble the individual components for you.
Find out more about the modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm gear unit SMI
SMI worm gear devices feature a smooth, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface area conversion makes the product preferably suited for harsh and demanding industries like food processing and pharmaceuticals.
Adaptable input designs such as for example NEMA, IEC or immediate motor mounts in extra foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units possess on all sides numerous fixing possibilities and enable an easy assembling for the customer.
Additional drive configurationscan be created by use of built-about components (e.g. torque arm and output flanges). The housings are made in light weight structure out of aluminium die cast. Electric motor attachment is realised in general through IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Get Gearbox with Engine – incorporating the next features: 1 to 6V voltage rating, 17100 rpm no load acceleration, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm large, 40mm high, a good robust worm drive gearbox powered by an MM28 engine (included), most suitable for applications where an easy to match, high torque outcome is necessary, nylon housing and gear, requires light oil or perhaps silicon grease lubrication, well suited for student based projects including robots and buggies.
Most ideal for applications where an easy to fit, high torque output is required
Ideal for student based projects including robots and buggies
Reversible Great torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible Large torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Features:
The engine is Gear DC engine with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared electric motor with self-lock, that is, in the case of motor without electric, the output axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole electric motor output shaft relatively-short than general gear electric motor, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windowpane, door, Mini winch. Ect.
In sumo robot or combat robot competition where great holding torque’s motor is essential in order to avoid your robot being pushed by your opponent robot. The worm equipment is definitely an improved option when compared to spur gear motor. How come worm gear so particular? Check this wiki out: Worm Travel.
“Unlike with ordinary gear trains, the direction of transmission (insight shaft vs result shaft) is not reversible when working with large reduction ratios, because of the greater friction involved between the worm and worm-wheel, when usually an individual start (a single spiral) worm can be used. This is normally a advantage when it’s desired to get rid of any probability of the result driving the input.”
In other terms, it is tough to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g

Hope you appreciated this article, to discover a lot more on worm motor see our website.

worm wheel gearbox
This gearbox utilizes a 30:1 ratio worm-drive reduction for applications that want extremely slow and smooth rotational motion. The worm-drive design not only minimizes backlash but also eliminates back-driving the gearmotor so a position can be kept even when power is not applied. The precision ground 3/8” stainless steel output shaft is supported by dual 3/8” ABEC 5 ball bearings to support lots from any orientation. The ¼” ABS plastic and aluminum structure offers a rigid framework without adding unnecessary fat and is very easily mounted to any flat surface by utilizing the base mounting tabs. Our Regular Spur Gear motors will continue to work with this gearbox (electric motor marketed separately). The Vertical Shaft Worm-Drive Gearbox is ideal for turn-tables, time-lapse systems and low-acceleration applications that want high precision and torque.

Motor RPM required = 1 / (mins per rotation desired / 30)
Example: 1 / (ten minutes per rotation / 30) = 3 RPM motor needed to achieve 10 minutes per rotation (in max speed)
Dimensions 3.43″ x 1.93″
Product Weight 5.9oz (0.375 lbs)
Output Shaft Diameter 3/8″ (0.375″)
Motor Size Compatibility Standard Spur Gear Motors

EP offers you the widest selection of ard, st and non regular and customised worm gearbox and worm gear motor.

EP maintains the highest level of standard in production of worm gears in gearboxes. From the design of gearbox, materials selection to manufacturing practice of worm gear box and gear electric motor.

Like exactly what you discovered? Share what you understand about worm wheel gearbox with your buddies and also household by taking them to our website.

worm reduction
Our regular 700 Series – the heart of EP acceleration reducer products – has been serving industry reliably for over a decade. Its proven modular style has set the sector standard for performance and may be the most imitated merchandise in today’s worm gear velocity reducer marketplace. But why settle for a knock-off when you can have the initial – from EP.
Specifications
11 basic single reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for much longer operating life.
Its multi-position mounting versatility permits installation in practically any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, and also greater precision during worm and gear alignment.
EP 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in almost any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings are available in our eCatalog.
EP worm gearboxes have earned a reputation to be a business benchmark worldwide. Our achievement originated from our relentless get for quality with state-of-the-artwork technology, all and will be offering worm gearboxes happen to be affordable prices. High flexibility accorded through a broad choice of mounting choices, shaft configurations and electric motor interfaces, produces the EP worm gearbox the default decision for the sector. The helical-worm and the double-worm version, with or without the torque limiter, soon add up to the advantage, creating a highly versatile drive system.
EP Worm gearboxes provide high torque with low swiftness gear ratio. Being basic and compact in design, these gears can perform higher gear ratio compared to the helical gears. These worm reduction gears having screw type qualities act like helical gears, but its helix angle is typically comparatively bigger) and its own body is normally quite long in the axial direction. The gears in these gearboxes could be correct or left-handed dependant on the purpose.
Mounting choice include universal housing, aspect flanges, foot (horizontal and vertical), shaft mounted with torque arm. Available in Solid shafts (one or dual), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a kind of interlocking gear composed of a worm shaft and worm wheel. The worm is definitely shaped like a screw and the worm wheel is definitely a type of gear machined to have a tooth profile with the same configuration.
The procedure of a worm gear is similar with that of a bolt and nut. The principle is equivalent to a nut that has been fixed so that it cannot rotate and for that reason progresses in the axial path when the bolt is usually turned.
The design of a worm gear is thought of through the relationship between the rack and spur gear on the center plane of the worm wheel.
Features
Great reduction ratio One rotation of the worm rotates the worm wheel by one tooth. Because of this, in a 1 speed reduction gears, the wheel can be manufactured therefore that it will be rotated 1/60 (1/120 in particular applications).
Orthogonal shaft The shafts are aligned orthogonally due to the structure. This characteristic can help you layout the turning transmitting direction at the right angle.
The arbitrariness of the rotation direction The screw direction of the worm can be clockwise or counterclockwise (generally clockwise). It is possible to switch the rotation direction of the worm wheel by changing the screw path.
A multitude of shaft layouts The wide selection of shaft layouts is one of the features of interlocking gears.For instance, right shaft output, remaining shaft output, dual shaft input and dual shaft output, etc., combine for a total of 14 types (Physique 2) and, if attachment orientations are included, it is possible to select from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is usually characteristic since the contact is certainly linear and the relative slide is fantastic. In comparison to rolling power transmission, sound and vibration are extremely low. Because of this, this technology is used to drive medical devices, elevators and escalators, etc.
The primary specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1～1(at an input of 1800 rpm)
Output torque(N・m) 20～66
Input speed(rpm) 0～1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4～30(at an input of 1800 rpm)
Output torque(N・m) 900～3570
Input speed(rpm) 0～1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3～255(at an input of 1800 rpm)
Output torque(N・m) 50～56600
Input speed(rpm) 0～1800
Key points when choosing a worm reduction gears
Selection
When selecting a worm reduction gears, the procedures for selecting the correct gear are described in the manufacturer catalogs and the series and models ought to be selected according to those procedures. Particular care should be taken in crucial areas such as selecting the strain index, calculating the overhang load and examining heat rated ability from the manufacturer.
Cautions during use
When utilizing a worm reduction gears, the heat produced through the initial amount of use is large and running-in operation at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is key to sufficiently attaining the performance of the worm decrease gears.
Maintenance and inspection
After completing running-in operation (approximately 50 hours), it is necessary to improve the lubricating oil and to change the lubricating oil from then on about 1 time per year according to the operation manual offered by the manufacturer.
Product Description
The Worm Reduction Gear Box is provided by our company is of supreme quality. Our products are made by using premium quality materials and advance technology at our vendors end. These are widely used in a variety of sectors. Our products are easily available at a very low market prices.
Motor Mount Frame Options
TEC Motors, worm decrease gearbox.
Option A-160 B5 Body, Flange Mount.
Choice B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Attach.
High efficiency and safe operation. High load capability and overload functions. Output Torque = (Electric power (kW) x 9550 (Regular))/ Gearbox result speed (rpm).
Higher ratios available on request dependent on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the industry worldwide. They succeeded in merging uncompromising top quality with stateoftheart technology amd renown price effectiveness.Absolute versatility is distributed by the wide selection of several mounting options, shaft configurations and engine interface, all offered as regular. The helicalworm and the doubleworm version, with or without the torque limiter, also add up, creating a highly versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 level C TO 80 level C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears can be found in two series: X and H.
The series X, having a worm and worm wheel set, comes in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell casing + coupling) provides great versatility to suit a broad range of applications and provides higher efficiency compared to the compact brand XC, where the emphasis is on space effectiveness.
Series H offers the same features since series X with an added plus: a spur equipment pre-stage at the insight end provides higher performance and a broader range of ratios compared to the X series.
Framework sizes 110 and 90 include a cast-iron casing cast enbloc, whereas smaller sizes make use of die-cast aluminium housings. The worm shaft is manufactured from casehardened and hardened alloy steel and ground-finished.
The worm wheel has a cast iron hub with cast bronze insert. Hollow output shaft comes as standard.
Broad range of options available:
second input, result flange, single or dual extension result shaft, torque limiter with through wire, torque arm.

Small Precison Worm Reduction Gearboxes
There are a number of specifications you will have to consider when making a worm gearbox selection.
First, what is the insight and output torque requirements? Next, check vendor horsepower/torque charts and pick the correct worm equipment reducer.
If how big is the gearbox will probably be an important consideration then check the reducer dimension specifications, not all manufacturers make compact units. Actually, working with the proper supplier will help you not just find the right equipment reducer but also prevent some of the most common mistakes in reducer selection. We provide a free guide to assist you find the right supplier to work with.
For low and fractional horsepower program you can expect two sizes of worm gear reducer, the SW-1 and the SW-5. Size and torque output will be the major variations between both of these models. Both feature the hollow or solid output shaft. Both models are compact and provide users a wide selection of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specs of your unique application or project is vital to selecting the correct worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes at the top and bottom
• Flush fitting bearing caps easy to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capacity of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a compact dual shaft gear motor or single shaft gear motor is required. This right angle gear motor is indeed versatile it can work just about anyplace.
Features & Options
Double Shaft or One Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power has designed and built unique, high precision mini gearboxes that cannot be found somewhere else. Our miniature gearboxes can be found in numerous configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide custom micro gearboxes that are designed and created to meet your unique specifications.
Contact us for the mini gearbox your application requires, or ask for a quote on a custom micro gearbox.
Micro Gearbox Options
Gearboxes are also known as reducers, gear reducers, swiftness reducers, gear drives, and gearmotors. All conditions can be used pretty much interchangeably. Please note that the links for our little gear drives include information on the full selection of frame sizes for that series or design.
Bevel Box Micro Gear Drive
Our bevel box miniature gear drives are program rated for the the best balance of functionality and cost. Torque could be balanced to meet up your RPM and working life requirements. Light-weight with low backlash performance (as little as 1°, with choice of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input boosts to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high amounts of thrust in a compact package. They offer an result shaft at 90° from the input, and are available in equipment ratios from 1:1 to 40:1. Light-weight but long lasting, with machined light weight aluminum housings and hardened alloy steel gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input boosts to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc mins of backlash or better. Also known as “shaft to bore gearboxes,” these devices provide a single input shaft that protrudes from reverse sides of the casing; output is a keyed bore. Standard solitary- and double-end shafts can be found and given keys and retainer rings. An array of equipment ratios and input sizes are available to meet up your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened metal gears, solid aluminium housings, and long term lubrication. They provide two insight shafts on opposing sides of the framework, with two result shafts perpendicular to the input shafts. Our mini 4 shaft worm gear drives deliver high effectiveness functionality with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: as little as ≈2°
Available with equipment ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Equipment Drive
These micro flange worm gearboxes produce an output at 90° from the input. They deliver superior functionality in a wide variety applications and are constructed with small footprints, making them well suited for procedures where space is bound. They offer high effectiveness with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specifically engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and are rated for speeds up to 3,000 RPM. Light weight aluminum housings and stainless gears and shafts make these inline spur gearboxes challenging and corrosion resistant, for your most demanding applications.
Result torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with equipment ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature right angle worm equipment reducers deliver excellent performance with high efficiency, and feature rugged construction for challenging power transfer operations. Available in three equipment ratios (5:1, 10:1, 20:1), our small worm gearboxes are designed in extremely small footprints for applications where space is bound.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power may engineer and produce a customized miniature gearbox to meet your unique specifications. We can produce customized micro gearboxes in practically any configuration the application requires, with output torque amounts as high as 900Nm. We are able to work from your gearbox designs, reverse engineer a preexisting unit, or assist you to develop an all-new style that provides the performance you will need. Demand a quote on a custom miniature gearbox or e mail us to discuss your specific requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest selection of small gear reducers
Greased for life
Ruggedly built
Modifications and particular ratios available
Custom small gearboxes made to suit
Input & Output Shafts
Input and output shafts with drive essential and retainer rings can be supplied to your specs for any of our hollow bore miniature gearboxes. We provide a simple selection of one ended or dual ended shafts to put together in these gearboxes. All gearbox shafts are given keys and retainer bands.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our software engineers to discuss your particular needs.
We offer a broad collection of misalignment shaft couplings in ” and metric bore sizes. Inch and metric precision ground shafts are available from stock.
Contact Us for POWERFUL Miniature Gearboxes
We are the miniature gearbox experts. All of our micro gear drive versions deliver superior performance in a small footprint, and are durable enough for challenging work environments. Contact us to find out more about our mini gearboxes, or demand a quote on a custom made model that’s tailored to your preferences.
Additional advantages of worm drive gearboxes include:

helical worm gear motor
Helical-worm gearmotors
Due to their design and from being combined with a helical equipment stage, the helical-worm gearmotors S..DR.. have particularly high efficiency. They are also extremely low-noise and thus avoid high sound emission levels.
Low-noise continuous operation: equipment unit combination optimized with respect to efficiency
Do you anticipate a drive solution to impress you with its high level of overall performance and efficiency? In that case, we would recommend our high-quality helical-worm gearmotors EP to you. These can be implemented individually in the modular system. In this manner, they offer you a massive range of sizes, gear ratios and engine sizes.
However, their greatest strength is definitely their running smoothness and their extremely low noise development. A very important factor is for certain – With the helical-worm gearmotors EP you opting for a powerful drive solution which you will hardly also hear.
The overall concept offers you a lot more practical product characteristics and benefits. These include the significantly higher efficiency of the helical-worm combinations as opposed to single helical-worm gear units. This is how you save extra energy in the operation of your systems and are able to noticeably decrease ongoing operating costs.
You will receive the low-noise helical-worm gearmotors EP. – to suit your individual requirements – with a wide range of AC motors. In addition, you can freely configure all of the relevant properties. In this manner, you can effectively make use of all the benefits provided by this mixture of low-noise helical-worm gear unit and performance-optimized motor. Even greater variance can be achieved thanks to the optional flange or foot-mounted design and by choosing between solid and hollow shaft.
Save money and time
By opting for one of our gearmotors, you are already saving money and time with this selection and task planning. It is because our modular system allows a multitude of mixture options for gear devices and motors. You can for that reason reduce operating costs, count on an extended service life and benefit from simplified maintenance that is characteristic of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than single helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm gear units of series EP
AC motors
Combine the helical-worm gear unit with this AC motors:
Characteristics
Quiet and reliable transmission of torque
High overload capacity
Hardened steel worm equipment and bronze alloy worm steering wheel provide exceptional toughness and lengthy service life.
Optional heavy duty bearings deliver high radial and axial load capacity
High strength cast iron housing (SK02050 – SK43125)
Lightweight, corrosion-resistant light weight aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Obtainable in footed, shaft install or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear models are helical/helical-worm combinations, so they are more efficient than normal helical-worm equipment units. Because of their outstanding effectiveness, these drives can be utilized in every commercial sector and tailored to person torque and acceleration requirements. The reduction ratios afforded by the helical-worm gear stage and the low noise levels during procedure make these gearmotors ideal low-cost solutions for simple applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Due to the unique combination of optimized worm wheel materials with unique lubricants, optimized shape, this powerful engine achieves high levels of effectiveness and torque. The housing machined on all sides allows diverse mounting options. Double chamber shaft seals are utilized as standard.
The reduced contour design helps it be suitable for implementing applications e.g. in the meals industry. The housing does not have any recesses, which simplifies cleaning – a particularly important feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm, foot
Class 12 Helical and hardened and ground worm gears: Provides higher efficiencies and higher torque capability in smaller sizes.
Multiple Input Options: Integral gear motors, in . or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft mounting, inch and metric output shafts, mounting pilots and flanges provide an array of design solutions.
UNIBLOCK Housing: For maximum rigidity universal mounting on five sides or with a torque arm.
Sealed for Washdown: Continues contaminants and water out.
Worldwide Engine: Multiple leads and windings for globally multi volt/Hz requirements plus modular design to accept brakes, encoders or forced cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors set new standards for reliability, effectiveness and economy with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly style offers easy integration right now and a truly future proof alternative. The EP gear engine offers total versatility in mounting choices includes shaft, base, encounter, and flange solutions. The electric motor terminal box could be mounted in alternate positions rotated in 90º steps around the engine frame providing for unparalleled integration options.
EP gear motors comply with UNITED STATES and International criteria, including NEMA, IEC, CSA, and CE, the EP series permits worldwide acceptance, a genuine total solution for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the EP series is certainly dirt tight and hose evidence,and can be used outside or in wet and dusty conditions without the use of additional enclosures. Full rated output is offered by the result shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connection Regular with CAGE CLAMP®
Additional features:
Connecting with Plug connectors.
With included inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
Because of the unique mixture of optimized worm wheel materials with special lubricants and optimized form, this powerful geared engine achieves high degrees of efficiency and torque. The low contour design makes it suitable for implementing applications electronic.g. in the meals industry. The housing has no recesses, which simplifies cleaning – a particularly essential feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a wide selection of compact, durable helical gear drives with long life performance features and simplified maintenance. The use of condition of the art helical and worm gear combinations affords optimum efficiency fulfilling a wide variety of ratio requirements. The 800 BR is certainly functionally interchangeable with most major manufacturer’s drives.
SPECIFICATIONS
Double and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All units shipped pre-lubed for your particular installation position with KluberSYNTH UH1 6-460
Obtainable in NEMA C-face flanged and immediate input
Projecting and hollow output shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white-colored (BK) and stainless epoxy finish (SBK)
Obtainable in hollow or projecting output shafts
Double and triple reduction ratios
Flanged or foot mounted
All units adaptable to flooring, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient compact right-angle geared electric motor. A favorably priced substitute for the standard tasks anticipated of a right-position drive.
5 gear sizes (S0 to S4).
Electric motor power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from i = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors available with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear unit and AC electric motor are directly flange mounted, the pinion is on the engine shaft. This integrated small design is an essential element for the high precision and the extraordinary stiffness of EP geared motors.
For vector-controlled inverter operation use of an incremental encoder is provided for as regular.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The amount of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are made from case hardened alloy steel and the flanks are precision floor. The worm wheels are made from unique wear-resistant bronze. Helical worm gears are equipped with a helical gear. Worm gears with shrink disc, torque limiter, and also adjustable backlash designs are also component of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Overall performance gearboxes in universal design. The housings are made from top quality cast iron. The rugget walls and internal ribbing ensure incredibly torsional stiff and sound dampening housings. The external ripping provides a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent procedure under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with durable walls and internal ribbing
Extreme torsional resistance and low noise
Case hardened worm shafts and worms with precision ground flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes equipped with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange mounting or universal design
Output shaft available since solid shaft or hollow shaft
Shrink disc, torque limiter,as well as adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG

Exactly what could helical worm gear motor provide for you? You ask We tell.

Request Custom or
Modified Product
gearbox-PR5
Working with miniature gears, Ever-Power offers designed and built exclusive, high accuracy mini gearboxes that can’t be found somewhere else. Our miniature gearboxes can be found in numerous configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and considerably more. We are able to also provide custom micro gearboxes that were created and created to meet your unique specifications.
E mail us for the mini gearbox the application requires, or demand a quote on a customized micro gearbox.
Miniature Bevel Gearboxes | Micro Bevel Gear Drives | Mini Bevel Gearboxes
Bevel Box
Miniature Cross Axis Helical Gearboxes | Cross Axis Helical Mini Gear
Cross Axis Helical
Miniature Shaft-to-Bore Worm Gearboxes plus Speed Reducers
Shaft-to-Bore
Miniature 4 Shaft Worm Gearboxes | Mini 4 Shaft Worm Gear Motors
4 Shaft Worm
Miniature Flange Worm Gearboxes | Micro Flange Worm Gear Drives
Flange Worm
Miniature Inline Spur Gearboxes | Micro Inline Spur Swiftness Reducers
Inline Spur
Compact Worm
Compact Worm
Micro Gearbox Options
Gearboxes are also known as reducers, gear reducers, quickness reducers, equipment drives, and gearmotors. All terms can be used more or less interchangeably. Please be aware that the inbound links for our little gear drives include details on the full range of framework sizes for that series or design.
Bevel Box Micro Gear Drive
Our bevel package miniature gear drives are program rated for the maximum balance of performance and charge. Torque could be balanced to meet up your RPM and operating life requirements. Lightweight with low backlash efficiency (as little as 1°, with option of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature assortment: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power’ miniature cross axis helical gearboxes provide relatively high amounts of thrust in a compact package. They offer an output shaft at 90° from the input, and so are available in gear ratios from 1:1 to 40:1. Light and portable but durable, with machined aluminium housings and hardened alloy metal gears.
Huge efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc minutes of backlash or better. Also called “shaft to bore gearboxes,” these devices provide a single insight shaft that protrudes from opposing sides of the casing; output is definitely a keyed bore. Standard one- and double-end shafts are available and supplied with keys and retainer rings. An array of gear ratios and insight sizes are available to meet up your needs.
Substantial efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and permanent lubrication. They provide two input shafts on reverse sides of the frame, with two output shafts perpendicular to the input shafts. Our mini 4 shaft worm equipment drives deliver high efficiency efficiency with low backlash.
Huge efficiency: up to 82% at 1,000 RPM
Low backlash: as little as ≈2°
Available with equipment ratios from 1:1 to 32:1
Rated for input speeds up to 4,000 RPM
Miniature Flange Worm Equipment Drive
These micro flange worm gearboxes produce an output at 90° from the insight. They deliver superior overall performance in a wide variety applications and are built with small footprints, making them perfect for functions where space is limited. They offer high performance with low backlash.
Gear ratios from 6.66:1 to 80:1
Huge efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specially engineered for encoder applications, Ever-Power micro inline spur gear drives are available in two frame sizes, and are rated for boosts to 3,000 RPM. Light weight aluminum housings and stainless gears and shafts make these inline spur gearboxes tough and corrosion tolerant, for your many demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: less than 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm equipment reducers deliver superior performance with excessive efficiency, and show rugged building for challenging power transfer procedures. Available in three gear ratios (5:1, 10:1, 20:1), our compact worm gearboxes are built in extremely small footprints for applications where space is limited.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power can engineer and produce a customized miniature gearbox to meet your unique standards. We can produce custom micro gearboxes in any configuration the application requires, with output torque levels as high as 900Nm. We are able to work from your gearbox designs, reverse engineer a preexisting unit, or assist you to develop an all-new design that provides the performance you need. Request a quote on a customized miniature gearbox or contact us to discuss your specific requirements.
The Ever-Power Advantage: Little is No Big Problem
Broadest selection of small gear reducers
Greased for life
Ruggedly built
Modifications and unique ratios available
Custom small gearboxes made to suit
Input & Output Shafts
Input and result shafts with drive important and retainer rings could be supplied to your specifications for just about any of our hollow bore miniature gearboxes. We provide a basic selection of solitary ended or double ended shafts to put together in these gearboxes. All gearbox shafts are given keys and retainer rings.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our app engineers to discuss your particular needs.
We offer a broad selection of misalignment shaft couplings through ” and metric bore sizes. In . and metric precision surface shafts are available from stock.
Die-cast zinc housing – Various models for hand operation
Compact Worm Gearboxes
4731 to 4742, 4746 to 4767
Perfect for use with crank handle
Main physical dimensions:
P/N 4731 to 4742 40mm x 40mm x 70mm
P/N 4747 to 4767 17mm x 35mm x 42mm
Wide variety of ratios from 1:1 to 30:1
1:1, 2:1 and 2.8:1 aren’t self locking, all the ratios are.
Max. output torques: 2 Nm to 17 Nm
Hand operation only
Immediate coupling between servo engine and worm gear is one of the crucial strengths of EP worm gearmotors, which combine DC engine technology with exceptional sturdiness and wear resistance. Electric motor and gearbox were created as you single, compact unit. Because of their reduced current draw, these gearmotors deliver additional accurate control of operating temperature and higher efficiency.
45 W to 250 W rated output power
Gearbox centre-centre size 31 mm and 33 mm
Aluminium gearbox casing
Case-hardened, tempered and ground worm
Great tin bronze worm gear
Steel shaft planetary gearboxes
Case-hardened and tempered steel gears
Low noise Selection of coupling flanges
We deliver worm gearboxes, spur gearboxes and planetary gearboxes with or without integrated linear business lead screw / ball screw adapted to your flexible modular concept.
Based on this we are able to select a wide selection of ordinary customizations to meet the requirements of various properties that are essential for each application.
If your application requires a gearbox with some special house such as for example small dimensions or low weight in relation to vitality, high efficiency, quiet and vibration-free operation, long life, high level of resistance to vibration, pressure or temperature, integrated linear screw, or a mixture of this kind of properties, our item range with more than 1000 different standard gearboxes is most likely a good start to have the ability to deliver a product that stands out in your favor.
Compact gearboxes are high-top quality gearboxes for regular drives. The electric electric motor is integrated with the gearbox into a single unit (the first equipment is on the motor shaft). Separate gearboxes for link with conventional IEC motors can also be supplied on request.
Due to the complexity of the gearboxes’ configuration, they can not be purchased in our e-shop. Our experts will be pleased to help you create your selection. We are pleased to send out you documentation or style the right set directly, on request.
VANE MOTORS WITH GEARBOXES
Combinations feasible with all our vane motors
Coaxial gearbox
Planetary gearbox
Worm gearbox
ATEX combinations possible
Stainless options possible
Special wishes possible
Ever-Power worm gearboxes have earned a popularity to be a business benchmark worldwide. Our achievement came from our relentless get for top quality with state-of-the-art technology, all while offering worm gearboxes happen to be affordable prices. High flexibility accorded through a broad choice of mounting choices, shaft configurations and motor interfaces, creates the Ever-Vitality worm gearbox the default determination for the sector. The helical-worm and the double-worm edition, with or without the torque limiter, add up to the advantage, creating a highly versatile drive system.
Ever-Electricity Worm gearboxes provide large torque with low acceleration gear ratio. Being simple and compact in style, these gears can perform higher gear ratio than the helical gears. These worm decrease gears having screw type characteristics act like helical gears, but its helix angle is typically comparatively larger) and its own body is normally quite long in the axial path. The gears in these gearboxes can be ideal or left-handed depending upon the purpose.
Mounting option include universal housing, part flanges, foot (horizontal and vertical), shaft mounted with torque arm. Available in Solid shafts (solitary or double), with torque arm or torque limiter.
EXCELLENT Geared Motors. Ever-Electrical power gearboxes and geared motors will be the electro-mechanical key elements for low backlash, efficiently running and highly powerful drive systems.
Our high-performance gear systems are designed to withstand the toughest industrial applications.
The gear housings are machined on all sides and permit diverse mounting positions and applications, making them much popular in the industry. Because of this our geared motors tend to be to be found within our customers own machines.
The smooth running of Ever-Power gear units and the outstanding load capacity of WATT teeth are achieved with 3D design backed by FEM (Finite Element Method). This tooth geometry guarantees optimum rolling contact under load.
The special tooth root design in mixture with tooth helix angle, tooth depth, the materials used and surface finish maximizes load capacity. This great gearing capacity enables smaller wheels to be used for the exact torque, and smaller gears with exceptional power density also increase reliability. Ever-Electricity geared motors are consequently incredible space savers.
Gearing manufactured with such micro-geometric precision allows the gearing enjoy required for troublefree rolling get in touch with to be substantially decreased and therefore the gear backlash to end up being minimized.
Double chamber shaft seals produced by Ever-Power are used as standard during parallel shaft, shaft mounted and helical worm gears for a high level of tightness.
Ever-Power’s modular gear technology meets the requirements of advanced drive devices:
Excellent power density
Minimum backlash
Smooth running
Diverse mounting options
Maximum reliability
High variability
Precision Worm Gearboxes and also Geared Motors
EP’s precision worm gearboxes are made for those more demanding applications where small specifications, high torque, high ratio, low backlash, low noise and long lifetime are required. Offered in 9 sizes, these worm gearboxes could be supplied with totally free insight shaft, with hollow bore input shaft and motor flange, and double decrease mixture units for slow velocity applications. By using cast iron housings, high quality bronze alloy worm tires and extended life bearings, reliability and overall performance are the crucial top features of this range.
High Precision Right Angle Transmission
Long Lifetime
WIDE RANGE Of Ratios
Special Surface Treatments

For the ins and outs of Compact Worm Gearbox do not hesitate to see our internet site https://www.ever-power.net/product/compact-worm-gearbox/.

The high-end economy lines GSN & GFE combine high performance with economic efficiency: both lines are also built with helical ground gears, ensuring the very least noise level and smooth running. The entire needle bearing provides been especially made to reach high torques that defeat the competition for devices of the same size. All planetary carriers are manufactured as a cage made from solid material. This increases silent operating characteristics while at the same time improving positioning precision and reducing backlash. Yet another shaft sealing band ensures maximum dirt and splash water protection in accordance with protection class IP65 in every lines.
One method to reduce backlash is by using precision gears. The concentrate on production in precision gears can be tighter tolerances, therefore all around the gear will be a tighter, more specific match. And the tighter fit means much less play in the gear teeth, which is the trigger of backlash to begin with. Of training course, precision gears are more expensive, but if the application demands high accuracy, after that precision gearing could be the way to go.
From a equipment design perspective, a simple way to lessen backlash is to make sure one’s teeth mesh tightly together. This is typically done by shortening the guts distance between gears. As for pre-loading, this is often done utilizing a spring mechanism to hold the gears firmly in place. This also eliminates the play between your gear teeth and therefore eliminates backlash.
Of course, the type of gears used can also have a huge impact on the amount of backlash. So for instance, some gear types such as strain wave gears, or harmonic equipment drives, have zero backlash.

The GSD, GSB & GSBL high-end gearbox lines are constructed in a space-optimized, two-stage design. Because of the lower torque values, the input stage is certainly dimensionally smaller than the result stage. Its short style makes the GSD line the ideal high-end gearbox for space restricted applications. The low standard backlash of the GSD collection makes it the perfect fit for highly dynamic applications where highest positioning and swiftness accuracy is required. The flange output creates highest torsional rigidity. For the accommodation of especially high axial loads, taper roller bearings are optionally available in sizes with 90 mm diameter or more. The GSB line stands for high performance in combination with low backlash and high precision. Its robust, one-piece housing allows for a high gearbox rigidity and the absorption of high radial and axial loads. The angular gearboxes of the GSBL collection provide same advantages as the GSB series; the right angle shape makes the GSBL collection the perfect match for all powerful applications where space is bound.

Figure out everything you’ve ever wished to know concerning Worm Drive Servo.

The worm wheel, also known as the worm gear, is simplistically a helical gear that matches the pitch, pressure angle, and helix angle of the worm. The factor between a worm equipment and a helical gear is the throat. This is an indent in the tooth variety that allows the worm to become correctly seated with the centerline of the worm wheel. The acceleration ratio of a worm gear pair is determined by the number of pearly whites on the worm wheel and the amount of thread starts on the worm. For worms with an individual thread, very high-quickness ratios can be developed. Because the speed ratio is the ratio of the amount of teeth to the number of thread starts, you’ll be able to change the reduction ratio by changing the worm set with another collection which is developed with additional starts. By adding more thread starts, the helix angle must increase if the guts distance is to stay the same.
There are various types of worm gear pairs. The set comprehensive above is actually a sole enveloping set. It really is designated as this sort of because there is only one set of threads on the worm that engage one’s teeth on the worm wheel. As the worm set is a friction travel and one group of threads repeatedly engages the worm gear, the materials of the worm has to be considerably harder than that of the wheel. Because of this, worms are typically produced from metal and worm wheels are typically created from bronze alloys. It’s quite common to harden and grind worms specifically when they are going to be used under excessive load or working at substantial speeds such as inside a reduction drive gearbox.

A different type of worm gear set may be the double enveloping pair. In this establish, the worm isn’t straight but has a concave tooth form which fits the curvature of the worm wheel. This permits even more of the threads of the worm to engage with the worm wheel. This additional contact allows for greater torque transmission.

A third kind of worm equipment set is the duplex pair. This kind of worm pair uses a single enveloping worm that includes a adjustable pitch across its size. As the pitch account changes, the tooth form is increased, and the backlash is decreased. Using this kind of worm gear couple, a near-zero backlash worm equipment assembly could be produced

You can find out more about Single Start Worm by visiting our internet site.