Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Air flow Compressor diameter TPI fans. Designed to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring in the middle of your electric engine, capacitor and quickness control switch is still installed nevertheless the cord itself is normally detached as observed in the photos. (Discover “Control Notice” below for modify type.)
T (See “Software Notice” below for make use of in a variety of other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” long with a collection screw smooth. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate engine electric fan motor china speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.

Control Take notice: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). Both of these types of switches both control the engine just as (but you possess a rotating knob and you have a pull-chain). If you order several motor at the same time, we will do our best to supply your purchase with each one kind of control or the additional.
Application Note: USUALLY DO NOT use this electric engine in a nonfan program. This is a completely enclosed fan electric electric motor and designed to have continuous ventilation over the engine casing for cooling. The casing isn’t vented and the electric engine will overheat and get into automated thermal overload if operate in a nonfan plan where there isn’t solid ventilation past the motor. (Caution Note: the electric motor will restart instantly when it cools cool off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans could also overload the engine and lead it to proceed into automated thermal overload. (Your lover blade from another producer may have a steeper blade position.)
Origin: This electric motor is produced in China.