• Engine gearboxes are maintenance-free, small power sources for driving vent, display, home and flap ventilation systems in greenhouses.
• Single phase and 3 phase choices for your own needs.
• Key feature of the drives are a self-braking worm equipment transmission and a built-in linear limit switch unit.
shaft-installed gear Greenhouse Gear Motor motors are comprehensive electromechanical drives in which the speed of the installed electric motor is decreased to the desired value using two to four reduction stages. The drives are powerful and durable and feature a compact and lightweight design.

The compact design is made possible through the mixture of a spur/worm gear drive with motors optimized for performance. motors also include a 60 to 70 percent fat loss compared to commercially obtainable drive motors. That is accomplished through the constant application of aluminium die casting technology, which ensures a high amount of rigidity for the gear and motor housing at the same time.

Each drive is produced and tested particularly for each order and customer. A sophisticated modular system permits an excellent diversity of types and a maximum amount of customization to consumer requirements.

Thanks to their integrated control units, the shaft-mounted gear motors will be the ideal drives for applications in reversing setting. In both rotation directions, defined end positions are guarded by two placement limit switches. This uncomplicated solution does not only simplify the cabling, but also can help you configure the end positions efficiently. The high shut-off precision of the limit switches ensures safe operation shifting forwards and backwards.
This gearmotor integrates a gearbox, a power motor, and limit switches. It really is connected with a metal shaft to carefully turn the pinions for greenhouse ventilation. With the support of electrical panel, it could run and stop after set number of turns. After that it can open up and close the home windows for greenhouse ventilation to right positions.
To keep the delicate environment inside a greenhouse, weather control systems certainly are a necessity. Many mechanical systems can be used in this respect; however cup vent drive systems tend to be the most popular. The drive system contains a central gearmotor linked to a 40:1 correct angle reducer with dual result shafts. These OP shafts connect to long jack shafts that spread over the roof line of the greenhouse linking to multiple rack and pinion mechanisms that open and close large cup screen panes in the ceiling for temperature control.
Depending on the size of the application form (amount of the shafting, volume and weight of the window panes) we offers two gearmotor solutions from a modified edition of their 200 series parallel shaft line – 1/5 HP and 1/20 HP. The application Is generally intermittent used; however the motors are ranked continuous because the glass pane windows could potentially be under constant, subtle adjustment during the day.
Gear Motor, also known as Electric motor Gearboxes, is a specific kind of electrical motor that is designed to create high torque whilst maintaining a minimal horsepower, or low acceleration, motor output. Gear motors can be found in many different applications, especially for the greenhouse, livestock and agricultural industry, our motors are available options to use roof vents, wall structure vents,roof shading and screening, they put on the shaft with chain couplings that compensate for alignment mistakes and can be easily taken out without disturbing the entire shaft.
shaft-mounted gear motors are total electromechanical drives in which the speed of the installed electric motor is reduced to the required value using two to four reduction stages. The drives are high performance and durable and feature a compact and lightweight design.