Split Taper Bushing

Additional Features:
Made of Steel
For use with cast iron bushed bore pulley
This U1 Bushing with 5-1/2″ bore is a high-quality precision product that is built for sturdiness and strength. U1 bushings are used in an extensively wide variety of applications, which include; sprockets, shaves, pulleys, gears, plus much more, we also offer all of these goods. What units this bushing apart is the high-quality steel structure along with exact manufacturing and high quality control; this ensures that you always get a premium quality consistent product. What really units us in addition to the other folks is our experienced expert workers and our company-wide target of customer satisfaction.
1. Be certain the tapered cone surfaces of the bushing and the inside of the driven product are clean and free from anti-seize lubricants.
2. Place the bushing in sprocket or different portion type that accepts the bushing.
3. Place cap screws loosely in pull-up holes. The bushing remains loose to assure sliding fit on shaft.
4. With crucial on shaft, slide the sprocket or other part type to the desired location on the shaft. Be sure to keep the heads of the cap screws accessible.
5. Align the sprocket or portion type, tighten the screws additionally and progressively until they are pulled up tight. Do not work with extensions on the wrench handles and do not permit the sprocket or part to end up being drawn i connection with flange of bushing. At this time there must be a gap between the bushing flange and sprocket, make sure this gap does not close.
Double split barrel ensures concentricity
Grips the shaft with great clamp fit
High torque carrying capacity
Permits blind assembly
Load not carried or limited by mounting screws
External key on most sizes for great drive and higher torque carrying capabilities
Double-split barrel for confident clamping
Solid flange to maintain concentric bores
Available in in ., metric, and spline bores. Bore range from 3/8″ to 10″
Solid Flange & Dual Split Barrel – Assures better concentricity to the shaft.
Key to Key Travel – With keys on both the shaft and item to supply the strongest possible drive.
3/4″ per Foot Taper on Barrel – Self locking taper supplies the highest amount of mechanical locking merchandise to product.

Taper bushing are trusted together with sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are constructed with high quality engineered components with wonderful tolerance. The characteristic is easy to work with and needs no extra alteration. These bushings can match almost all varieties of assemblies and sizes. They are the best choice in design for mechanical connections.
To complete designations put bore size. For example: PD1215X16MM designates a 1215 taper bushing with a 16mm bore.
No costly re-boring: full range of both metric and imperial available.
Standard range fits up to 125mm/5″ shafts & Hub diameter required depends upon the application.
Complete brief reach range readily available, for compact compact assemblies & Clean, Compact Style.
Simple installation and removal.
This Split Taper Bushing was created exclusively for use with cast iron bushed bore pulleys and can be purchased on the same page as the pulley you need.
For use with 1 3/16” shaft sizes.
Comes with 2 set screws.