Solitary reduction worm gearing provides high ratio reduction with few moving parts in a close-coupled small drive. The proper angle arrangement of driving-to-driven machine takes a the least space. Input and output shafts can be prolonged in either or both directions in horizontal or vertical arrangements adaptable to any installation requirement. Efficient electric motor speeds are reduced to slow speed requirements of many industrial machines in one reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Face Adapters or Scoops)
Cast Iron or Steel Housings
Products
The exclusive usage of the involute Helicoid Thread form (with leaving side contact) on the worm and gear offers high efficiencies, and lengthy service lifestyle. The hardened surface and polished alloy metal worm develops a easy, work hardened surface area on the bronze equipment. Because of this worm gears wear in and improve with extented service while additional gears are deteriorating. Ever-Power offers a wide collection of model configurations, sizes, ratios, and components from our standard products.
Fabricated Designs
If the application involves severe shock loads or possible housing damage from external sources (as in steel mills or mobile products applications) Ever-Power can provide fabricated steel housings with up to 48″ center distances. Fabricated housings provide maximum rigidity and strength which allows the transmission of higher horsepower amounts than are possible with standard cast iron models. Extra heavy part plates connect the worm and gear shaft bearing supports, assuring correct meshing of the gear under all load circumstances. In smaller sized sizes, fabricated steel reducers are interchangeable with Ever-Power standard cast iron reducers.
Custom Designs
Ever-Power can offer custom velocity and reversed engineered reducers for your application, be it a fresh project or a primary drop-in replacement for a competitor’s acceleration reducer. Fabricated steel reducers allow Ever-Power to complement a competitor’s footprint, centerline, and shaft elevation allowing a primary drop-in alternative saving the customer time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are manufactured from phosphorous bronze. Our design also incorporates a hardened, surface and polished alloy steel worm. This combination develops a clean, work-hardened mating surface area of the bronze equipment which improves with prolonged service.
Worm gearing is a course of equipment reducers that utilizes correct angle, nonintersecting shafts. This form of reducer provides even and quiet operation and permits the possibility of large swiftness reductions. These gears can be found from stock in a wide variety of ratios, from only 4:1 up to 3600:1. The small design and structure allows worm gear reducers to be placed in a comparatively small space. Thus, high reductions in a restricted package size may be accomplished with this configuration. Our worm equipment features the constant sliding tooth action between worm and the teeth. This escalates the tolerance for heavy loads and shock loads. Worm gear drives offer users high reducing capacity for relatively low cost in comparison with various other types of gearing.
The usage of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that use worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm gear reducer gearbox series foundation on years of experiences uses designed teeth surface area with unsurpassed torque transfer efficiency with great efficiency, efficency and cost.Worm gear program transmits power through sliding get in touch with, leading to extremely low vibration , sound, small backlash and self-locking property
-Housing:Onetime we casting creats great rigidity for severe impacts. Outer cooling fins and internal lubrication essential oil diversion channel design to increase heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Metal S45C or SCM415, precison machined and carburized to HRC45 or HRC60, then for precision tooth grinding to make sure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm gear reducer is one kind of reduction gear box which includes a worm pinion insight, an output worm equipment, and features a right angle result orientation. This type of reduction gear container is generally used to take a rated motor speed and produce a low speed result with higher torque worth based on the reduction ratio. They often can solve space-saving problems since the worm equipment reducer is one of the sleekest reduction gearboxes available because of the little diameter of its output gear.
worm gear reducerWorm equipment reducers are also a popular type of quickness reducer because they provide the greatest speed decrease in the tiniest package. With a higher ratio of speed decrease and high torque result multiplier, it’s unsurprising that lots of power transmission systems make use of a worm equipment reducer. Some of the most typical applications for worm gears can be found in tuning instruments, medical examining equipment, elevators, protection gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission provides two sizes of worm gear reducer, the SW-1 and the SW-5 and both can be found in a range of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both of these options are produced with tough compression-molded glass-fill polyester housings for a long lasting, long lasting, light-weight speed reducer that is also compact, non-corrosive, and nonmetallic.
Features
Our worm equipment reducers offer a choice of a good or hollow result shaft and feature an adjustable mounting position. Both SW-1 and the SW-5, however, can withstand shock loading better than other decrease gearbox styles, making them ideal for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Equipment Reducers also known as worm gearbox or worm speed reducers. Worm gear reducers are used for speed reduction and increasing the torque for electrical engine drives. You can decide to install your NEMA engine to the reducer by using the NEMA C encounter flange or use a coupling. If you want a coupling for the output or input shaft discover our coupling section for selecting a coupling. We offer four assemblies left hands and right hands and double result shaft and shaft input and shaft output. Interchangeable with most worm gear manufactures. See data sheet in product overview for diamensions. Unless you see your type, make sure you Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear speed reducers are available in ratios from 5000:1 to 175,000:1 and center distances from 7” to 20” (larger sizes available on request). Output torque ranges from 33,000 in pounds. for the 7” CD DDVM-70 to 582,900 in lbs for the DDVM-200. Mechanical HP input requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers are available in four configurations: horizontal, vertical, shafted, and shaft mounted.
These reducers are ideal for water/waste-water equipment drive applications such as thickeners and clarifiers, which need a vertical down shaft. Other available configurations also make Ever-Power triple decrease reducers perfect for make use of on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or additional process or components worm gear speed reducer handling systems where large torques/gradual speeds are needed.
These reducers are also available with a helical principal reduction stage and so are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM as low as 0.01 with a 1750 RPM input.
Ideal for ultra-slow velocity, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Description
The HDR Series worm gear reducers are found in low to moderate horsepower applications to lessen speeds and increase torque. Worm gear reducers can be found in direct or indirect drive, direct drive versions are 56C or 145TC flange install with either right, left or dual result shafts or a hollow bore result. The indirect drive versions are shaft input-shaft output boxes for make use of with sprocket or pulley drive systems. They offer an effective low priced solution to speed reduction and improved torque, with higher tolerances for shock loading than helical equipment reducers.
In order to decide on a gearbox speed reducer, you will have to determine the required torque and services factor for the application. Click on “Specs” above for a desk that will assist in determining the service factor. For service elements above 1.0, multiply the required torque by the service factor.
Our standard 700 Series – the heart of Ever-Power rate reducer product line – has been serving industry reliably for over 40 years. Its confirmed modular style has set the industry standard for functionality and may be the most imitated product in today’s worm gear swiftness reducer market. But why settle for a knock-off when you’re able to have the initial – from Ever-Power.
Specifications
11 basic single reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting flexibility allows for installation in virtually any position.
Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, and also greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings can be found in our eCatalog.
TheIncreased Quality! Industrial Rated! Inexpensive!One-piece gearcase, without exterior ribs, is made of close-grained cast iron and for rigid equipment and bearing support. It also offers excellent warmth dissipation.Dual lip, spring-loaded seals protect from oil leakage and stop dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon metal shafts for greater strength.High tensile strength cast bronze worm wheel and hardened and ground alloy steel worm made intregal with the shaft for lengthy and trouble-free life.Essential oil sight gauge for simple maintenance (unavailable upon sizes 25 and 34).Factory oil loaded.Every unit test run prior to shipment.Universal installation with bolt-on feet.Highly modifiable design.All this at substantially reduce prices than you have already been accustomed to spending money on reducers of lesser quality. Less