Starting from these considerations, we’ve a gearbox with a engine mounting flange that’s separable from the housing which incorporate the essential oil seal; in this manner we avoid any threat of damaging the oil seal in case of alternative of the insight flange and the O-Ring could be eliminated.
All the aside covers, swinging and with feet, have O-Rings instead of traditional flat gaskets.
The sizes 03-04-05 permit the rotation of your feet without disassembling them; furthermore the versions with swinging apart covers allow the lateral flanges to end up being installed on both sides with simple fixing worm gear unit screws.
The worm screw includes a ZI involute profile: with this worm-wheel coupling we will get a much better performance with a temperature reduction.
The gearboxes and motors are painted with RAL 9022 aluminium colour epoxy powder to safeguard the parts from oxidation and against micro-blowholes that can come during the pressure of die-castings.
The CHPC pre-stage gears (already present in the catalogue of CHM) may also be mounted with this range, obtaining a gear ratio up to 1 1:300. For bigger reductions can be done to possess two gears collectively using a proper kit