Single and dual reduction planetary gear drives to be utilized with electric, hydraulic, air motors or mechanical power input from high swiftness, low torque sources to deliver reduced speeds at increased torques. The input aspect has standard SAE pads for engine mounting. Obtainable in the three result configurations demonstrated below. Many units could be furnished with an integral parking brake.
Single reduction drives are limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with integral parking input acceleration is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Models provide 95% power tranny efficiency.

Wheel Drive
Input side has standard SAE pads and splined insight. Output side has hub for mounting automobile wheel. Free wheel is possible by using the spring disconnect to disengage the drive shaft. The disengage feature is certainly regular on all wheel drives.

Shaft Output
Input side regular SAE pads with splined insight. Output side options include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined insight. Output side includes a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 is offered with or without essential parking brakes. The “SW” Power Wheel hydraulic planetary drive offers extra-large tapered roller bearings, a ductile iron hub and high temperature treated ring equipment to reduce backlash growth due to wear. The exterior bearing nut supplies the greatest in shaft retention and shaft power. Output can be a spindle shaft or various sizes of integral pinion gears.