Equipment Containers For Rotary Cutter’s, Shredders, and Choppers

Item description
RC 30 Collection Gearbox, 40hp Rated, 1-three/eight” SB enter, 1-one/two” X twelve Spline Output. 1:one.47 Ratio Exchange your broken rotary cutter gearbox with this replacement unit. Why rebuild when you can change at this sort of a lower cost? These gearboxes have been used by Worksaver, HawkLine, Worldwide, WAC, Huge Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and several more. Note: Genuine Gearbox might have a rounded housing or square as demonstrated, based on recent availability, all internal parts are interchangeable and specifications for both bins are equivalent! This gearbox characteristics a 1:one.forty seven Speed Up gear ratio for use on 5′ and larger diameter rotary cutters. Sector regular one-three/8″ sleek diameter enter shaft with 1/two” shear bolt hole and retaining ring groove and 1.57″ diameter twelve tapered spline output shaft allow fitment to most gentle, normal and medium duty rotary cutters. Every gearbox functions high pace ball bearing units and warmth dealt with gears and shafts to make sure prolonged life. Four bolt mounting matches business standards. Every gearbox includes blade carrier mounting nut and cotter pin. Gearboxes are delivered dry and need sixteen ounces of eighty-90W gearlube or equivalent. Disclaimer: Any and all Authentic Gear Manufacturer’s (OEM) tradenames, emblems, drawings, colors, descriptive data and element figures are used for components identification reasons only, and DN Products, LLC (DN) is in no way implying that any certain parts are OEM parts. Further, any use of the OEM’s tradenames, trademarks, drawings or part quantities by DN is designed only to aid DN’s consumers, in obtaining the proper DN component or component which will replace the OEM’s part.

rotary cutter gearbox

Gearboxes perform to administer a transfer of speed and torque by means of their inside gear rotation, helping the general overall performance of your rotary cutter. This RW-710-6S gearbox operates at 75-90 HP. The housing is made from durable ductile iron and the input shaft steps one-3/eight in., with six splines. It has a gear ratio measuring one:1.forty six, and is designed for use with 5 ft., 6 ft., and 7 ft. rotary cutters. More dimension and much more HP manner make sure you make contact with us for information.