Screw Jack Systems offer extensive lifting and positioning design solutions for a wide variety of industries. Highly accurate and intensely reliable machine screw and ball screw jacks are matched with an comprehensive range of drive, connection, motion control, safety, and safety components to provide a complete bundle from a single source.

We offers system design assistance, taking the guess work out of product selection. Our years of application experience assures that all elements of the look process are considered. We also offer full assembly drawings, which gives time saving value and guarantees the correct system components are integrated into your design.
Worm Gear Screw Jack systems are ruggedly designed and produced in standard models with load managing capacities from 1/4 ton to 100 tons. They may be used separately or in multiple plans. There are no “standard” travel lengths and all Worm Gear Screw Jack systems are built to specification.
The jack housings are made from ductile iron and proportioned to support the rated capacity of the unit. MJ, 1/4 ton, and 1/2 ton models have aluminium housings.

Each Worm Gear Screw Jack incorporates an alloy steel worm which drives a higher screw jack china strength bronze worm equipment (drive sleeve). The worm shaft is backed on antifriction tapered roller bearings with exterior seals provided to prevent lack of lubrication (sealed radial bearings on the MJ, 1/4 , 1/2, and 1 ton models). The drive sleeve is certainly backed on antifriction tapered roller or ball thrust bearings. Rotation of the drive sleeve causes the lifting screw to translate or rotate, depending upon jack configuration.
The Inch and Metric Worm Gear Machine Screw Jacks incorporate an alloy or stainless steel worm which drives a higher strength bronze worm gear (drive sleeve). The worm shaft is supported on anti-friction tapered roller bearings with external seals provided to avoid loss of lubrication. The drive sleeve is usually supported on anti-friction tapered roller or ball thrust bearings. Rotation of the drive sleeve causes the acme thread lifting screw to translate or rotate, depending upon jack configuration.

The threads are precision formed, typically using Course 2-C (Centralizing) tolerances. Jack lift shaft business lead tolerance is approximately ±0.004″ per foot.
Designed with state-of-the-art CAD and CAE systems and adhering to stringent production requirements, these screw jacks fulfill all the required safety, cost-efficiency, and toughness mandates of your application.