Worm travel gearbox with motor
worm motor
A robust worm-drive gearbox powered by an MM28 engine. Ideal applications where a simple to fit, high torque output is required. Great for student based jobs which includes robots and buggies.
The unit has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. E.g. reducing to size. The electric motor is snap fitted into its cradle to activate the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine is not turning. The high gear ratios of 216:1 or 336:1 get this to gearbox appropriate for small walking robots, lifting mechanisms, and additional applications where large torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draw up to a few amps, making them ideal applicants for the DRV8833 motor driver carrier. Engine overheating can be caused by excessive stalling, also at suprisingly low voltages. We recommend that you utilize stall-detection sensors, or just view your robot, to make sure that it doesn’t stall for more than a few seconds at a time.
This gearbox includes a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also suits on the smaller threaded end of the shaft, although it is not specifically designed to work with this type of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct position worm geared motors established new criteria for reliability, performance and economic climate with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design offers easy integration today and a really future proof alternative. The Ever-Power gear electric motor offers total versatility in mounting options includes shaft, base, encounter, and flange solutions. The motor terminal box could be mounted in substitute positions rotated in 90º steps around the motor frame offering for unparalleled integration opportunities.
Ever-Power gear motors comply with North American and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total remedy for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be utilized outside or in wet and dusty conditions without the use of additional enclosures. Full rated output is offered by the result shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With integrated inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the remedy for applications requiring a corner turn, optional dual result, or perhaps an inability for the motor to be back driven. The DC correct angle gear motors are created for constant and intermittent duty operation. Our right angle gear reducers are designed with several mounting plate options, making them ideal for a number of DC electric motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are designed to generate high torque in a small package size. Worm Gear Motors are excellent for applications that want a personal- locking or breaking feature since the output shaft can’t rotate when there’s no power applied. Also, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision minimize gears, voltages and sizes, EP Products has a DC Worm Gear Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Oral Chairs / Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with among our Worm Gearheads. EP Products will work with you to design and manufacture a Worm Gear Motor that may optimize the overall performance of your specific application.
Built to your unique requirements
Engine Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Slash / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine runs on the metal gear box for toughness and a high torque output. Due to the special mechanical framework of the worm get the motor output shaft is definitely self locking and will not be rotated.
This part runs on the two wire connection and supports direction control along with PWM speed control. Rated voltage is 12v and will accomplish 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear models from EP DRIVESYSTEMS especially show their strength in applications where large gear ratios are essential. Our worm geared motors are therefore optimally suited for use in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions allow simple and efficient cleaning of the get system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular design give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each one of these has its own unique requirements. The EP series worm gear motors can be quickly and efficiently adapted to fulfill your needs.
Worm gear products impress with their high power density and small style. If required, we are able to also source them with the highly effective nsd tupH surface area treatment.
In addition to the basic EP housing, we offer an extensive type of bolt-on parts to customize the merchandise including torque arms, shaft addresses and output flanges. These could be easily field set up, but we may also be glad to assemble the individual components for you.
Find out more about the modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm gear unit SMI
SMI worm gear devices feature a smooth, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface area conversion makes the product preferably suited for harsh and demanding industries like food processing and pharmaceuticals.
Adaptable input designs such as for example NEMA, IEC or immediate motor mounts in extra foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units possess on all sides numerous fixing possibilities and enable an easy assembling for the customer.
Additional drive configurationscan be created by use of built-about components (e.g. torque arm and output flanges). The housings are made in light weight structure out of aluminium die cast. Electric motor attachment is realised in general through IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Get Gearbox with Engine – incorporating the next features: 1 to 6V voltage rating, 17100 rpm no load acceleration, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm large, 40mm high, a good robust worm drive gearbox powered by an MM28 engine (included), most suitable for applications where an easy to match, high torque outcome is necessary, nylon housing and gear, requires light oil or perhaps silicon grease lubrication, well suited for student based projects including robots and buggies.
Most ideal for applications where an easy to fit, high torque output is required
Ideal for student based projects including robots and buggies
Reversible Great torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible Large torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Features:
The engine is Gear DC engine with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared electric motor with self-lock, that is, in the case of motor without electric, the output axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole electric motor output shaft relatively-short than general gear electric motor, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windowpane, door, Mini winch. Ect.
In sumo robot or combat robot competition where great holding torque’s motor is essential in order to avoid your robot being pushed by your opponent robot. The worm equipment is definitely an improved option when compared to spur gear motor. How come worm gear so particular? Check this wiki out: Worm Travel.
“Unlike with ordinary gear trains, the direction of transmission (insight shaft vs result shaft) is not reversible when working with large reduction ratios, because of the greater friction involved between the worm and worm-wheel, when usually an individual start (a single spiral) worm can be used. This is normally a advantage when it’s desired to get rid of any probability of the result driving the input.”
In other terms, it is tough to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g

Hope you appreciated this article, to discover a lot more on worm motor see our website.