With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.Additionally, all our production procedures are in compliance with ISO9001 standards.
- After Warranty Service:
- Local Service Location:
- Showroom Location:
- Brand Name:
- Model Number:
- After-sales Service Provided:
- Applicable Industries:
- Suitable Excavator(ton):
- Working PrGear-reducer inefficiency converts power to heat. AGMA ( American Gear Manufacturers Assn.) guidelines for worm-gear, helical, and other types of reducers limit the maximum allowable operating temperature to 100°F above ambient, not to exceed 200°F. To stay within these guidelines, worm-gear reducers must be considerably larger than equivalent-rated helical reducers (to dissipate more heat) or rely on auxiliary cooling devices.essure:
- Max. Torque:
- Supply Ability:
- 10000 Unit/Units per Month
Packaging & Delivery
- Packaging Details
- Wooden Case
- Shanghai/ Ningbo
Quantity(Units) 1 – 10000 >10000 Est. Time(days) 35
–Driven (outer) yoke same as drive yoke but is mounted on the implement. There are two types of shafts, domestic and metric, which are identifiable by their shapes. Domestic are generally one of four shapes: round, square, rectangle or splined. Metric are: bell, star or football shaped. In either case the primary (front) shaft is the same shape as the secondary shaft, only bigger so that the secondary shaft fits inside. This allows a telescoping effect to take place when the implement is raised on the 3 pt. or during a turning movement such as a bailer. All shafts have to be sized before use. Attach the implement to the 3 pt. and raise and support it. Attach the proper end to the tractor and attempt to attach the other to the implement. If the shaft is too long trim one of the shafts with a hack saw and try it again until it fits. This allows for the implement to be raised without binding. The shafts should overlap as much as allowed.
To be negotiated
PTO Slip-Clutch Adaptor
PTO Slip-Clutch Adaptor
Tractor/Implement PTO Slip Clutch Adaptor
Drive shaft End: 1-3/8 x 6 Spline Quick Release.
Implement end: 1-3/8 x 6 Spline Clamp (Dual Pinch Bolts)
To be used with Series 4,5 and 6 Drive Lines.
900 N-m (664 ft-lb) Rating
Clutch Diameter: 7-3/32″
PTO Adapters increase or reduce size, extend the shaft, and/or adapt between spline styles.
PTO Clutches offer protection for PTO systems and equipment.
Unless otherwise specified, these are rated up to 75 Horsepower.
CNC Teeth Machine
CNC Lathe Workshop
Heat Treatment Machine
3D Measurement Machinery
GeaEPG is willing to cooperate sincerely and develop commonly with friends!r Teeth Profile Test Machines
Heat Treatment Workshop
Tooth Profile Workshop
Low carbon steel, C45, 20CrMnTi, 42CrMo, 40Cr, stainless steel. Can be adapted regarding customer requirements.
Blacking, galvanization, chroming, electrophoresis, color painting, …
High frequency quenching heat treatment, hardened teeth, carbonizing, nitride, …
Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shippment.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.
If you have another question, please feel free to contact us.
Packing & Delivery
Also I would like to take this opportunity to give a brief introduction of our Ever-Power company:
Our company is a famous manufacturer of agriculture gearbox,worm reduce gearbox, PTO shafts, Sprockets ,rollar chains, bevel gear, pulleys and racks in china.
We have exported many products to our customers all over the world, we have long-time experience and strong technology support.
Some of our customer :
Italy: COMER,GB GEABOX ,SATI, CHIARAVALLI, AMA , Brevini
Germany: SILOKING ,GKN ,KTS
France: Itfran, Sedies
Brazil: AEMCO ,STU
USA: John Deere , BLOUNT, Weasler, Agco, Omni Gear, WOODS
Canada: JAY-LOR , CANIMEX ,RingBall
-Ø Our Company with over twelve year’s history and 1000 workers and 20 sales.
-Ø With over 100 Million USD sales in 2017
-Ø With advance machinery equipments
-Ø With large work capacity and high quality control, ISO certified.
you also can check our website to know for more details, if you need our products catalogue, please contact with us.